Hyperlite State 2.0 Wakeboard, Blank – Blem

The Hyperlite State 2.0 Wakeboard was created to take a rider’s skills to the next level. Learning from other asymmetrical designs, the State 2.0 has a shorter but more effective edge on the rider’s toe-side that makes hard to learn wake jumps a lot easier. This is because there is less rail to initiate when applying toe-side pressure. Once set, the smoother toe-side transition is then held by the State 2.0’s thinner profile molded-in fins, creating less drag and a better release off the top of the wake.

Subtle molded-in toe-side footbed risers were also added to help a rider create more leverage when pressure is applied. The longer, more traditional heel-side edge complements this asymmetrical design by allowing the natural body position of a rider to generate stability and speed into the wake without a loss of pop due to reduced surface area. The State 2.0 has been tested and proven to be the best choice for a rider looking to master the foundations of wakeboarding.

Save Big on Factory Blemish!
This is a new product discounted due to minor manufacturer cosmetic blemishes that may or may not be noticeable to the naked eye.. This will not affect the performance or longevity of the product.

Biolite 3 Core
This core material is the gold standard in the industry and used throughout the Hyperlite line. Biolite 3 is the lightest and most durable formula to date.

Abrupt Continuous Rocker
This rocker line adds a little more kick to the speed that so many riders look for. The Abrupt Continuous rocker line transitions to a slightly exaggerated tip and tail rocker, creating added pop without sacrificing speed into the wake.

Asymmetrical Design
Visible to the eye, the shape differs on each side of the board providing ride characteristics suitable for beginners to enhance toe-side edging.

Molded-In Fins
Non-detachable fins designed into the board’s shape for added stability and solid edge hold.

Molded-In Toe-Side Footbed Risers
Elevation of the board’s top deck shape under the toe-side platform which increases toe-side edging effectiveness.

Layered Glass
With layered glass every Hyperlite deck will have the same pop off the double up year after year.

Monocoque Construction
Integrating the top and bottom fiberglass layers into one, generates a more durable board on side impacts to prevent delamination.

M6 Inserts
Delivers a more secure fit of the bolts to the inserts, improving bolt retention, keeping binding hardware locked down.

	State 2.0 135	State 2.0 140	State 2.0 145
Length	53.1″	55.1″	57.1″
Surface Area	810 sq.in.	845 sq.in.	880 sq.in.
Tip/Tail	12.5″	12.5″	12.5″
Center Width	17.1″	17.25″	17.25″
Rocker Height	2.6″	2.7″	2.85″
Stance	22″-26″	22″-26″	22″-26″
Rider Weight	140 lbs. and up	150 lbs. and up	160 lbs. and up